Audiovox CDM-8940 Cell Phone Accessories and Battery


	Free shipping for orders $39 and over, or a flat $3.95 per order. Free antenna booster with each cell phone battery. Offer extended to midnight

Shop by Cell Phone
Manufacturers

Audiovox
CDM-8940

FCC ID: PP4TX-160C

Dimensions
3.56" x 1.82" x 0.92"

PM8940

The following accessories were designed to work with the cell phones listed above.
Batteries Carry Cases Holsters	Chargers Antennas Data Cables (data transfer)	Handsfree Adapter Handsfree Headsets Car Speakerphone Memory Card	Charger Adapters Universal Mounts Toolkit / Fun stuff

Lithium Ion Battery for Audiovox CDM 8940
Capacity: 1200 mAh
Thickness: 7mm

Replacement Lithium Ion Battery for Audiovox CDM 8940

Replacement for Audiovox OEM part BTE8940B & BTR8940B

Lithium ion batteries do not have "memory" issues so you can recharge anytime without first draining the cell phone battery
Our replacement cell phone batteries work with your original or our aftermarket chargers. Does not require a special charger.
Talk & standby times are highly dependent on network conditions and individual usage patterns

Why you should buy our cell phone batteries

What does the "mAh" number above mean?

car charger for Audiovox UTStarcom 120 1400 Slice 7025 7075 8400, 8410, 8450, 8455, 8460, 8610, 8615, 8625, 8900, 8910, 8915, 8920, 8930, 8932, 8940, 9900, 9950, VM4050, Snapper

Car Charger Adapter (CLA) for Audiovox CDM-8940
Recharge battery
Power phone for virtually unlimited standby and talk time
LED changing indicator
Smart IC chip protects from over-charging or short circuit
Fits standard vehicle outlets or cigarette lighter socket
Converts to a home/travel charger with the universal AC/DC power converter
See our carrying case for charger & other accessories

Compatible with Audiovox oem part # CLC4B

car charger for Audiovox UTStarcom 1400 Slice 8400, 8410, 8450, 8455, 8610, 8615, 8900, 8910, 8915, 8920, 8930, 8940, 9900, 9950, VM4050, Snapper

Premium Car Charger Adapter (CLA) for Audiovox CDM-8940
All the features of the car charger to the left, plus:
Tougher & much longer cord
Tougher polycarbonate housing
Heavier duty strain release
Stainless steel parts
Even better electronics inside to manage the charging process
see sample picture of the difference

Compatible with Audiovox oem part # CLC4B

travel charger for Audiovox UTStarcom 1400 Slice 8400, 8410, 8450, 8455, 8610, 8615, 8900, 8910, 8915, 8920, 8930, 8940, 9900, 9950, VM4050, Snapper

Home or Travel Rapid Charger for Audiovox CDM-8940

Leave the desktop charger at home or keep an extra charger in a different room

Keep this light charger in your briefcase / backpack to recharge from anywhere

LED changing indicator

Power phone & recharge battery

IC chip protected charging

Works globally: 110-240 VAC

See our plug adapters if you are traveling to Europe, the UK, or Asia

Compatible with Audiovox OEM part CNR4 & TRC4B

retractable charger for Audiovox UTStarcom 1400 Slice 8400, 8410, 8450, 8455, 8610, 8615, 8900, 8910, 8915, 8920, 8930, 8940, 9900, 9950, VM4050, Snapper

Premium Retractable Car Charger Adapter for Audiovox CDM-8940
Retractable cable extends to the length you need to recharge battery & power phone for virtually unlimited standby and talk time
Just push the retract button & the cable rewinds back into the plug for easy storage. No more loose cable to stow away when the charge is not being used.
Compact size makes it great for traveling!
LED charging indicator and other features are the same as the standard car charger
Cable is 38" long when fully extended

more chargers accessories
AC to DC Adapter for Cell Phones

Belt Holster w/ Swivel Clip for Audiovox CDM-8940
Hard plastic holster with pager style swivel belt clip
Swivel clip locks in multiple positions to allow the phone to sit vertically or horizontally (sideways)
Swivel clip can be attached to your belt, pants pocket, purse strap, etc.
Allows easy & quick access to the phone when needed

for Audiovox PM-8940

Audiovox PM-8940

Custom Fit Leather Case - Black for Audiovox CDM-8940
Genuine leather case w/ a permanently attached belt clip
Belt clip is almost flat so this case will easily go into your pocket or purse
Clear and flexible plastic shields keypad / screen from dirt and damage (the clear plastic does not show up well in the picture)
Phone is fully usable while in the case
Includes the appropriate openings for accessories
Includes removable wrist strap
See more carrying cases further down the page

for Audiovox PM-8940

Features common to the two horizontal cases:
Low profile horizontal design for all day comfort (no more being poked by your phone)
Extremely strong leather wrapped metal clip attaches to belts, pants, purse straps
Bottom opening allows you to easily "push" the phone out of the case
Soft interior lining protects your phone

Executive Quality Hard Leather Case (LH) for Audiovox CDM-8940	Premium Secured Leather Case with Secured Belt Strap (PSL) for Audiovox CDM-8940
Smooth leather with detail stitching for traditional styling Flap with magnetic button secures phone This case is truly a customer favorite see more pictures and learn more about this case	Smooth padded leather Extra strap with snap lock can be used (or not used) to further secure the case to your belt or purse strap Magnetic flap secures phone see more pictures & learn more
Product Code: UN-LH-V60 $16 each - In stock	Product Code: UN-H-PSL-V400

Audiovox CDM-8940 Premium Quality Vertical Leather Case for Small Flip Phones (Cobalt Series)

Smooth premium leather with detailed stitching makes this case stand out in both casual or formal attires

Strong leather wrapped leather clip secures case on the belt or pants and rotates & locks so you phone can be worn vertically or horizontally (belt clip is non-removable)

Velvet inner lining protect phone from scratches

"Auto close" magnetic flat closure keep the phone secured inside the case (the whole flap is magnetic, there is nothing to align, it will seem to close itself

For phones up to 3.63" long (not including the antenna), 1.9" wide, and 1.1" deep

see additional pictures of this case

see other available sizes of this case



Premium Quality Pouch with Belt Clip (MEVA) for Audiovox CDM-8940
Semi-rigid padded pouch protects your phone while keeping it within easy reach Elastic sides expand to accommodate various size phones and keep the phone in the pouch Magnetic strap closure provide for extra security Belt clip secures pouch on the belt or pants and swivels so your phone can be worn vertically or horizontally (belt clip is non-removable) For phones up to 4" long
Color: Black Size: Med see additional pictures

Heavy Duty Cell Phone Case with metal belt clip and belt loop

Heavy Duty Cell Phone Case with removable metal belt clip and belt loop for Audiovox CDM-8940

Heavy duty ballistic nylon is extremely tough and is very resistant to scuffs and daily use

Heavy duty stainless steel positive locking D ring with 4 point rivet connector on the back of the phone mates with either 1) the thick belt loop with snap that fits up to a 2" belt or the 2) 360 degree swivel stainless belt clip (both are included)

Secured connection between the case and the belt clip/loop. Case can only be removed when it is upside down

Strong hidden magnetic button on the flap secures your phone

Fits phones up to 3.75" x 2.00" x 1.10"

see more pictures and learn more about this case

Apollo Cell Phone Case with metal belt clip and belt loop for Audiovox CDM-8940
Heavy duty ballistic nylon is extremely tough and is very resistant to scuffs from daily use
Can be attached three ways:
1) clipped onto a belt or pants using the heavy duty stainless steel clip
2) a belt can be threaded thru the nylon loop vertically or horizontally
3) the case can be attached to your pants or bag using the included carabiner
Includes elastic pen loop and elastic memory card holder
Flap with velcro secures your phone
Fits phones up to 4.1" x 2.10" x 1.10"
see more pictures and learn more about this case


	Black Leather Pouch Genuine leather case w/ a permanently attached belt clip Leather wrapped metal belt clip is almost flat so this case will easily go into your pocket or purse Velcro flap keeps phone securely in the pouch until you need it



Multi-Use Bear Cell Phone Case for Audiovox CDM-8940
Padded tough nylon pouch protects your phone while keeping it within easy reach on your arm, neck, wrist, leg, or belt. This is easily our most versatile phone case. Velcro strap keeps your phone secured in the case Two adjustable removable straps can be used to keep your phone on your arm, leg, or wrist so your phone is always available while you run your errands or exercise . A removable neck strap can be used to hang the case around your neck or work area. Belt loop on the back of the case even lets you use it as a conventional belt case. For phones up to 4.2" long see additional pictures
Color: Red $21 each - In stock	Color: Blue $21 each - In stock

Officially Licensed NCAA & NCAA Cell Phone Pouch with Belt Clip for Audiovox CDM-8940

Semi-rigid padded pouch protects your phone while keeping it within easy reach

Belt clip secures pouch on the belt or pants and can be worn vertically or horizontally

see more pictures about NCAA & MLB cases


	2.5mm to 3.5mm Adapter with Microphone Allows you to your favorite headset and enjoy music through your phone. You can plug in your own music headset with a standard 3.5mm phono plug. While your headset will not have a mic, you can still talk into your phone because this adapter includes a mic Note: the 3.5mm plug is commonly found on headsets used with portable CD / cassette / DVD players, iPods, and other MP3 players.


	2.5mm to 3.5mm Adapter Allows you to your favorite headset and enjoy music through your phone. You can plug in your own music headset with a standard 3.5mm phono plug. Note that this is for listening sound/music from your phone only, you cannot talk using this device Note: the 3.5mm plug is commonly found on headsets used with portable CD / cassette / DVD players, iPods, and other MP3 players.


Handsfree info	This phone can use any standard 2.5mm handsfree headset unit without an adapter. Add any of the following 2.5mm handsfrees to your shopping cart now.



	Jabra 100 Pivot Hands-free with Boom Mic for Audiovox CDM-8940 Soft interchangeable ear-gel to fit different size ears (3 are included) Noise cancellation design Multi-pivot design enables the microphone boom to be adjusted to multiple position to best fit your use Features both on/off on-touch AND sliding mute switch Plugs into phone's 2.5mm handsfree port Can be used with either ear



	J-Loop Hands-free with Boom Mic for Audiovox CDM-8940 Sits securely and comfortably around the ear Flexible ear loop auto adjust around ear Comfortably soft earpiece can be rotated to enable the handsfree to work in either ear. Plugs into phone's 2.5mm handsfree port Can be used with either ear Available with or without a button that operates as a mute or one-touch
		with one-touch* feature



	G-Loop Hands-free with Boom Mic for Audiovox CDM-8940 Sits securely and comfortably around the ear Ear loop can be adjusted or removed Boom mic can be adjusted to various angles for best voice pickup Plugs into phone's 2.5mm handsfree port Can be used with either ear Available with or without a button that operates as a mute or one-touch
		with one-touch* feature



	Earbud Handsfree for Audiovox CDM-8940 Can be used with either ear Comfortable and light Plugs into phone's 2.5mm handsfree port If you want an even higher quality of this earbud, order the Motorola built one below.
		with one-touch* feature



	"Over The Head" Handsfree with Adjustable Boom Mic for Audiovox CDM-8940 Designed to fit with earpiece on the left ear Headpiece can be adjusted to fit different head sizes Boom Mic can be rotated up / down 120° and bent toward your mouth Comfortable and light Plugs into phone's 2.5mm handsfree port




	Voice Changer Handsfree for Audiovox CDM-8940 Use as a standard handsfree or change your voice to one of four presets: 1) robot, 2) young man to older man / female to male, 3) kids voice, 4) or what the manufacturer called "duck voice" This item is for fun, illegal use is prohibited. Plugs into phone's 2.5mm handsfree port

You can use a Bluetooth wireless hands-free headset with your phone after adding this adapter.

Check out our Bluetooth headsets here.

Jabra A210 Wireless Bluetooth Adapter for Non-Bluetooth mobile Phones
Quickly and easily add Bluetooth to your non-Bluetooth phone so you too can use a wireless hands-free headset

Bluetooth 1.2 compatible

Talk time: Up to 8 hours / Stand-by time: Up to 240 hours

For use with phones with a universal 2.5mm hands-free jack

This item is non-refundable and non-returnable once the sealed package has been opened. (This item will not work with Nokia's non-standard 3 band 2.5mm jack)

Bluetooth hands-free headset not included


	USB Data Cable with charging function, include software drivers on CD for Audiovox 8900, 8400, 8410, and 8910, 8940 Recharge your phone using the PC's USB port Connect your phone to the PC
	Include driver software on CD that will setup the phone as a serial port and modem for internet access. Just use Windows' built in dial up networking to setup your phone as a modem to connect to the internet. Software for other functions (such as download pictures from the phone, managing your phone book from the PC, transferring ringtones) are not included



	Clip-On Cellphone Antenna (3db gain) for Audiovox CDM-8940 Passive signal repeater extends the range of your cell phone and improves signal quality without directly connecting to your phone Advanced tapered design; the antenna base is thicker for added strength but narrows at the top to reduce wind resistance noise Easy non-permanent installation; just open your window, clip this antenna on the edge of the window, then close the window



Looks similar to the antennas used for satellite radios and the radio antennas on certain high end German cars	"Shark" Fin External Cellphone Antenna for Audiovox CDM-8940 Passive signal repeater extends the range of your cell phone and improves signal quality without directly connecting to your phone Reduce dropped calls and static noises and help to stabilize High performance glass mount design works through the glass without any drilling. Installation takes only a few minutes. Mounts on rear window. No cable connection required. The "shark fin" mounts on the outside as shown in the picture to the left. A small coupling box mounts on the inside of rear wind shield. All mounting is done using the included self adhesive tabs. Be sure to follow the installation instructions by using the included alcohol pad to properly prepare the surface of the windshield see more info