Replacement Retractable and Stub Antenna for Motorola v60i, v60c, v60g, and v60t


	Replacement V60 "Stubby" Antenna for V60 series phones Stub antenna cannot get bent so it will always stay straight For best result, replace your current antenna with the same type. If you currently have a stub, replace it with another stub. You know you have this antenna if your antenna unscrews off your phone. If it does not unscrew, you need the one for the V60g below. Will not work with V60g (GSM). See the V60g antenna below.
	For all CDMA, GSM, and TDMA based V60 phones except for the V60g, V60p, V60s, and v60x


	Replacement V60p, V60s, and V60x Stub antenna cannot get bent so it will always stay straight Made specifically for the V60p and V60x, will not fit the V60i, V60t, V60g, and V60c phones Note that the threads are inside the barrel and cannot be seen unless you look inside the barrel
	For V60p & V60s only	For v60x only
		Not in stock - no ETA

	Replacement V60g "Stubby" Antenna + Antenna Base - V60g only! Stub antenna cannot get bent so it will always stay straight Made specifically for the GSM based V60g, will not fit the V60i, V60t, V60p, V60x, and V60c phones Comes as shown with antenna and antenna base (brushing) You know you have this antenna if your antenna does not unscrew off your phone. This antenna is best replaced along with the antenna base below at the same time. See how easy it is to remove the old antenna base here.


< See more pictures >	Replacement V60 series phones, including v60c, v60t, v60i (will not work with V60x and V60p) Short bullet antenna cannot get bent so it will always stay straight Will work with V60g (GSM) only if you replace the antenna base at the same time Dark shiny chrome finish


	Replacement V60 Replacement Antenna Base (antenna brushing) This is the part that the above antennas screw into. Great if the threads on your current base is striped. You will need a T6 Torx screwdriver to install this. Scroll down the page to find one. For all TDMA, CDMA, and GSM V60 phones except for the V60p, V60s, V60x, and the V60t in color (works fine with the non-color V60t) See how easy it is to remove the old antenna base here.

Interior Windshield Antenna
Extends the range of your cell phone and improves signal quality; 3db gain
Tri-band design works with all cell phone systems
Attaches to the inside of the windshield with provided self adhesive strip.
Car wash proof since it is mounted inside the car
Note: Must be used with a separately available external antenna adapter

Magnetic Mount Antenna
Extends the range of your cell phone and improves signal quality; 3dbi gain
Tri-band design works with all cell phone systems
Attaches to the top of your car with the strong magnetic base
For best result, route the cable inside thru the door, not the window. The included cable is 10 feet long.
Note: Must be used with a separately available external antenna adapter

External Antenna Adapter for V60

Connects your V60 series phone to one of the antennas to the left.

Small metal connector goes in the small hole near the base of your phone while the plastic ring clips cover the existing antenna for stability

Version for all V60 phones (v60c, v60i, v60g, v60t) except for the V60p, v60x and V60s


Fullset Cellphone Toolkit Twelve (12) piece toolkit Carrying case with tool handle Include 3 torx drivers, antenna removal tools, case openers, small screwdrivers, more Great for cell phone repairs, changing faceplates, replacing antennas, and changing internal components.	Single Screwdriver - Tri-Wing "Y" This new Y shaped driver is needed for some of the newer Kyocera, Sharp, Panasonic, Siemens, and Sanyo phones. Great for cell phone repairs, changing faceplates, replacing antennas, and changing internal components.	Single Screwdriver - T6 This is the most commonly needed torx driver for opening the cell phone case for antenna removal and repair Great for cell phone repairs, changing faceplates, replacing antennas, and changing internal components.
$24 each - In stock	$6 each - In stock	$5 each - In stock

blue led light on key chain
Lithium Battery Included (ready to use)

LED Flashlight Keychain --------- Really Cool Gift!
Shines an astonishingly bright beam illuminating any path
Two modes of operation: momentary on when squeezed and a constant on slide switch with practically unbreakable LED
Lithium battery with long reliable shelf life (works when you need it)
Comes with keychain loop to be used as a keychain or can be attached to an existing keychain, zipper, etc.
Put one on all your family's keys, zipper pulls, & emergency packs.
Ours is better! (1) The lithium battery in our light can be replaced. Just open the case with a small screwdriver. (2) This light was found to be much brighter than other tested samples. (3) Has both squeeze type on/off (momentary only ) and positive slide type on/off (light stay on)


Red is great for preserving your night vision, safety, and signaling	Blue is very bright and a real attention getter	White is great for all round illumination, best for night reading	Green is very bright and very unique


	Portable Laser Pointer with 4 additional head designs Project a narrow red beam or 4 different patterns at to 4,500 feet Include 4 interchangeable patterned tips (arrow, dollar sign, cupid, and smiley face) and three LR44 batteries. Satin gold tone finished with keychain and quick release connect or Packaged in plastic storage box Great for presentations, pointing out distance objects, etc...