|
| |
|
Universal Battery Only Standalone Charger
(see instructions)
|
|
|
|
|
|
Works great for spare batteries up to 3/4" thick
|
|
|
Retractable AC plug keeps the unit small and easy to pack for trips
|
Soft cushion on the spring loaded clamp keeps the battery in place.
|
Works for batteries with the electrical contacts on the top or on the side.
Keep a spare cell phone battery charged at all times. A spare battery
can keep you talking. |
|
Simple to use:
-
Do not plug the charger into the wall outlet for the
following steps until asked to do so in step 5.
-
Align the charger's metal contact pins with the metal
contacts on the battery. For batteries with more than 2 electrical
contacts, start with the two outer contacts (left most and right most
contacts)
-
Press to open the spring loaded clip to insert the
battery. Verify that the metal contact pins are lined up with the
contacts on the battery selected in step 2 above.
- Make sure the charger is not plugged into the wall
outlet. Push the test button labeled "TE".
--- If the "CON" light comes on, you have setup the charger
correctly for the battery, goto step 5
--- If the "CON" light does not come on, press the polarity
switch labeled "SW" to switch the polarity. Push the
"Test" button again to test.
--- If the "CON" light still does not come on, go back and
repeat step 2 to 4 above and realign the charger's two metal contact
pins with two different contact points on the battery.
- After you have passed the "TE" button test, plug the
universal battery only charger with the battery attached into a wall
outlet.
- The "PW" light will come on indicating power is going to the
charger.
- The "CH" light will flash while the battery is being
charged.
- The "FUL" light will indicate a fully charged battery.
|
|
|
|
|
| |
|
Ability to charge most if not all
cell phone, pda, and digital cameras batteries under 4.3V